Photo of the Astoria bridge in Oregon that crosses the Columbia river near the mouth that empties into the ocean.
Photo: Sprinter in the Tillamook Forest - Oregon 2023 - One of the last trips with the Duratrac tires. We are on to testing the BFG KO2 All Terrain tires in 2024.
]]>Photo: Testing the Duratracs at the Unofficial Sprinter Proving Grounds.
]]>]]>
]]>
Click here for more information on the full length Sprinter cargo mats
]]>]]>
Get a free rear door screen cover if you purchase both a high roof side door screen and rear zipper screen - A 100.00 value. Offer is good until June 1st 2022. *Rear door cover will only fit the rear zipper screen mode
]]>
From the part timer, full timer, factory RV owner, home built RV owner, custom RV owner, motovan owner, the vanlife movement, contractor, expediter, and everything in between - we want to continue to be your first choice for Sprinter Parts and Accessories. Thank you again, Mark and the Staff
We were able to get out and enjoy a little time in 2021 at Crater Lake Oregon.
]]>
Click here for the 907 Snorkel Kit for 2019 and up Sprinters!
]]>
]]>
Detroit Lake Oregon - 2020
]]>Keep in mind this is with the suspension hanging or drooping and is not with the weight on the ground.
Please give us a call or email if you ever have any questions.
Sprinter 3500 SumoSprings product is available by clicking here.
Sprinter 2500 SumoSprings product is available by clicking here.
971-678-5940
mark@sprinterupgrades.com
]]>
The Sprinter Ex-Guard grill guard protector is designed to help protect from wildlife impact and is a front end protection system. Not many manufacturers will make that claim - if any. It has the strongest weight to strength ratio in the industry. These are the same grill guards that have been used on large commercial trucks (semi-trucks) for years, and are not built just for looks; these are much stronger than the aluminum, stainless or other "for looks" type grill guard brush guard combos.
Click here for more information or to order the Sprinter EX Guard
]]>
Screen sale ends Friday May 15th!
New Offering: This year we have a new offering. The EZ-Pass magnet screen. This allows you to have a magnetic opening centered in your screen. You just push through to enter and exit. The magnets can also be offset from the pillars rather than centered.
Click here for the new EZ-Pass Magnet screens and all other side door magnet screens.
]]>
.
.
]]>
To see more on the Scopema Seat Swivels for 2019 and up Sprinters click here.
]]>
Mark
]]>
We can take look at your vin number or you can look at the headlight photos below. The quickest way to tell the difference is the headlight styling. The 2018 will have the taller headlight assembly and the 2019 and 2020's have the lower profile headlight assembly.
We saw this back in 2007 when Mercedes switched over to the then new 2007 Sprinter Chassis (NCV3 model). Many RV's with the RV model year of 2007 were built on the 2006 chassis (T1N model). In fact due to the slow down around 2008 some RV model years were reaching into 2008 and maybe even 2009, and they were still being built on 2006 chassis year Sprinters.This created some parts issues as people ordered parts based on the RV model year.
RV manufacturers have different model years and designs, just like a car manufacturer does. Each new year RV model can bring new floor plans, updates and upgrades over the last year RV model. RV companies buy up a lot of vehicle chassis made by the vehicle manufacturer, and then build them out as an RV. It takes time to build an RV. A vehicle chassis purchased in 2018 will generally get built out as a 2019 RV model and you will enjoy all the RV updates for that year RV even though you have a chassis one year behind.
Normally this will make little to no difference at all unless there is a body change as there was in 2007 and now again in 2019. Whichever year RV or chassis you end up with, we hope you have a great time with it and get it out there to enjoy it.
We hope to see you on the road!
2019 Sprinter low profile headlights - black MB emblem and hood spoiler installed
2018 and earlier taller headlight profile
]]>
Sprinter 2500 Hellwig sway bars - click here
Sprinter 3500 Hellwig sway bars - click here
Sprinter 3500 Suspension Upgrade Package A with Hellwig sway bar - click here
Sprinter 3500 Suspension Upgrade Package B with Hellwig sway bar - click here
Sprinter 3500 4x4 Suspension Upgrade Package F with Hellwig sway bar- click here
=
]]>
2019 Sprinter VS30 Fender Flare 4pc set
2019 Sprinter Side Door Screens
2019 Sprinter Rear Door Screens
2019 Sprinter Cab Window Vents
2019 Sprinter Cab Window Insulation
2019 Sprinter 3500 Suspension Upgrade Package B
2019 Sprinter 2500 Suspension Upgrade Package B
2019 Sprinter 4x4 Suspension Upgrade Package F for 2500 and 3500
2019 Sprinter Sumo Springs Rear
2019 Sprinter SuperSpring Steel Helper Springs
2019 Sprinter Rear Sway Bar 3500 2wd and 4wd
2019 Sprinter Front SumoSprings
2019 VS30 Sprinter 2500 2wd 2 inch lift kit
]]>
In years past the Bowden cable or throttle cable was used to mechanically connect your accelerator pedal to your fuel delivery system.The Sprinters accelerator pedal position is read by a sensor that then sends a signal that tells the fuel delivery system what to do. This type of system is know as Drive by Wire.
Drive by wire systems are tuned for the standard driver and standard vehicle. The PedalBox will allow you to custom tune the throttle response. Some manufacturers offer similar functions as the PedalBox built into the vehicle via settings like Sport Mode, etc.
Made in Germany.
For off road use in US and Canada.
Please click here to purchase the PedalBox, find installation instructions and liability information.
]]>
]]>
]]>
]]>
If we are going to mention flares, we should also mention the popular front fender flare 2 piece kit. The 2 piece kit is not an extended style flare but is designed to match the factory rear flares that North American Sprinters come with from the factory, adding protection, and a nice finished look.
Sprinter models in Europe come with no fender flares. So we also have available a 4 piece European model flare kit that will give you 4 flares. These will match more closely to the North American Sprinter vans rear fender flare, and will also include the front flares to match.
Click here for more information on the Sprinter Extended Fender Flare 4 piece kit
Click here for the Sprinter Front Fender Flare 2 piece kit
Click here for the 4 piece European Flare Kit
Front Extended Flare 4 piece kit
Rear Extended Flare 4 piece kit
Front Fender Flare 2 piece kit
]]>