Van Compass 4X4 Sprinter 2.0" Suspension Lift Kit
This is a complete 2" lift kit for the 2015-up Sprinter 4x4. It works by using drop brackets and spacers that will maintain your factory suspension geometry. If you need that extra clearance for off-road trails or an overland expedition, this is it.
Additional height can give you more room for a larger tire. A larger tire will in turn give you more ground clearance under the suspension. Raised height will also give you much better front and rear bumper entry and departure angles, meaning you won't drag your rear hitch or bumper as hard as you used to. RV models with low hanging generators or tanks can now be given a bit more clearance.
Check out the Sprinter skid plates to compliment this off-road Sprinter package.
Lifted vehicles should be driven with caution and reduce speed; use caution and good judgement while turning or on uneven ground. By purchasing, the customer agrees to the release of liability terms set forth by the manufacturer Van Compass and understands all product safety warnings.
Click here for instructions for front lift with liability terms.
Click here for instructions for rear lift with liability terms.
Included Components 2500 Vans
- Front 2.0” strut spacer - 1/4” hot rolled steel
- Front 2.0” subframe drop spacers - 4140 heat treated chromoly
- Motor mount 2.0” lift spacer - 3/16" hot rolled steel
- Transmission 2.0" lift spacer - 3/16" hot rolled steel
- Steering shaft extension - 4140 heat treated chromoly
- Low pressure power steering hose extension
- Front brake line relocation brackets
- Rear add-a-leaf spring pack
- Rear sway bar links - 11/16" x .120" wall DOM and 3/16" hot rolled steel
- Rear lower shock mounts - 1/8" hot rolled steel
- Rear bump stop drop brackets - 1/8" hot rolled steel
- Rear wind assist extension bracket - 1/8" hot rolled steel
- All necessary hardware
- All warranties are manufacturers warranties
- By purchasing, the customer agrees to the release of liability terms set forth by the manufacturer and understands all product safety warnings
- Made in the USA by Van Compass
- Removal of the front mudflaps.
- Slight trimming to the rear of the front fender opening.
- Trimming of the front bumper and front inner fender well liner.
- Minimum 14mm wheel spacer (9/16”) if retaining factory 54mm offset steel wheels. This is for tire clearance between the inside of the tire and the strut and rear inner fender.
- Aftermarket wheels with an additional 14mm offset.
.
3500 vans will include a full rear spring pack but component list above for the 2500 is mostly the same - may have minor differences in specs.
3500 vans - With this lift kit, 235/85R16 tires can be fitted with the following conditions met:
- Removal of the front mudflaps.
- Slight trimming to the rear of the front fender opening.
- Trimming of the front bumper and front inner fender well liner.
You may also like
