Sprinter 4x4 Falcon Shocks 2015 to 2026 front pair
The Sprinter 4x4 Auxiliary Falcon shocks for the front of your 2500 or 3500 come in either 10 way adjustable or custom tuned non adjustable - tuned by Sprinter enthusiasts. These work in combination with your factory front struts and come with all hardware necessary to install. These are a bolt on application. See information below.
Fitment 2015 to 2026
Factory information for adjustable shock: TUNED 3.3 FAST ADJUST SHOCKS, KEY BENEFITS
- 10 compression damping settings via the 3.3 fast adjust knob
- Internal SP2 free bleed allows 2 distinct tune profiles
- Smoother ride, better cornering, reduced sway and wind buffeting
- More effective bump control than factory shocks
4x4 Sprinter owners know the struggle: stiff ride over small bumps and excessive sway on uneven terrain. Van Compass custom-tuned Falcon shocks fix both. Washboard harshness, abrupt impacts, and side-to-side sway are all significantly reduced. The aluminum piggyback reservoir design offers serious adjustability through three positions: Position 1 for light, fast riding on rough roads; Position 2 for dialing in your preferred ride with 8 micro-adjustments; Position 3 for heavy loads or maximum control. The knob is easy to reach and adjust while installed.
Technical highlights:
- 2.3" aluminum body — dissipates heat, resists corrosion
- Full 2" damper piston (238% increase over stock)
- 3/4" hard chromed shaft for impact and corrosion resistance
- High-pressure nitrogen charge for cavitation-free operation
- NOTE *** 2019+ Sprinter with rear A/C contact us before ordering
Factory information for standard non adjustable: TUNED MONOTUBE SHOCKS, KEY BENEFITS
- Smoother ride, better cornering, reduced sway and wind buffeting
- More effective bump control than factory shocks
4x4 Sprinter owners know the struggle: stiff ride over small bumps and excessive sway on uneven terrain. Van Compass custom-tuned Falcon monotube shocks fix both. Washboard harshness, abrupt impacts, and side-to-side sway are all significantly reduced — and each kit is tuned to your specific van weight range.
Technical highlights:
- 2.3" aluminum body — dissipates heat, resists corrosion
- Full 2" damper piston (238% increase over stock)
- 3/4" hard chromed shaft for impact and corrosion resistance
- High-pressure nitrogen charge for cavitation-free operation
- NOTE *** 2019+ Sprinter with rear A/C contact us before ordering
Additional information for either product:
- Never Exceed Gross Vehicle Weight Rating
- NOTE *** 2019+ Sprinter with rear A/C contact us before ordering
- Read all manufacturers recommendations, warnings, and disclaimers
- By purchasing, the customer agrees to the release of liability terms set forth by the manufacturer and understands all product safety warnings
- All warranties are manufacturers warranties
- Made in the USA by Van Compass
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov